Coating Capabilities
- Coating widths to 82" (208cm)
- Roll weights to 4000 lbs (1800 kg)
- Roll diameter on coater to 42" (112 cm)
- Core size 3", 4" or 6" (7.6, 10.2, 15.2 cm)
- Viscosity from 1 to 20,000cps
- Dryer temperature to 450†F (230†C)
- In-line printing
- NDC measuring system for thickness, coat weight and moisture
control
- Corona treater
- Reverse roll
- Mayer rod
- Slot Die
- Air knife
- Four-zone gas-fired air floatation ovens
- Two-roll transfer back treat station
- Run speed 500-1500 ft./min. (150-450 m/min.)
- Steam treater
Calendering Capabilities
- Widths: 20” to 84” (50 to 213 cm)
- Nine roll stack
- Roll weights to 4000 lbs. (1800 kg.)
- Roll diameter up to 58” (147 cm)
- Standard core sizes 3” and 6” (7.6 and 15.2 cm)
- Run speed up to 2500 ft/min. (760 m/min.)
- Nip load pressure 100 to 2000 psi (0.7 to 14 MPa)
- Threading arrangements 1 to 8 nips
Slitting/Rewinding Capabilities
- Widths up to 82” (208 cm)
- Roll diameter up to 60” (152 cm)
- Roll weights up to 4000 lbs (1800 kg)
- Core sizes 3”, 4”, 5” or 6” (7.6, 10.2,
12.7 or 15.2 cm)
Converting Capabilities
-Sheeting up to 52” square (132 cm)
-Subrolls:
widths from 6” to 60” (15 to 152 cm)
diameters up to 16” (41 cm)
core size 3” (7.6 cm)
